013/04
014/04
Viewing
Angles
1.
Decide on the best position for your Outdoor television.
2.
If possible, test the television in this position to ensure the viewing angle is appropriate for the viewing
position. Your television viewing angle may differ depending upon the size and style of your television.
3.
If unsure, plug the television into the nearest mains power supply and turn on once you have ensured
the area is safe. Whilst the screen is on, position the television until satisfied that the picture does not
darken or disappear from your viewing position.
4.
Once you have decided on the television position, check for any hazards that may prevent you from
installing in this area, i.e. cables or pipework beneath the wall. When mounting your television in stud
walls, check for any supporting framework behind the plasterboard.
Warnings
•
Do NOT install your television near a heat source.
•
Do NOT install your television on an unstable surface.
•
If you are unsure about the installation of your television
STOP IMMEDIATELY and contact a professional.
Incorrect installation could result in bodily injury or damage to the television.
Please Note: Videotree televisions are best installed at a height and
angle that suits the eye-line of the user.
!
27” Outdoor
Installation
Videotree 27” Outdoor Television’s are quick &
easy to install:
Videotree 27” Outdoor televisions come with the bracket
mounted to the back of the screen.* Please ensure that
the mount is installed onto a load bearing wall or a
vertical wood stud.
Brick & Concrete Wall Mount
1.
Mark out your holes using the corner holes on
the wall plate(B), using a 8mm bit drill 50mm
deep holes.
2.
Push the concrete anchors(K) into the drilled holes.
3.
Align the wall plate(B) to the anchors(K), secure the
wall plate(B) in place using a lag bolt washer(J) and
lag bolt(L) in each corner.
Wood Stud Wall Mount
1.
Mark out two holes using the middle holes on the
top and bottom of the wall plate(B). Using a 3.8mm
bit, drill 50mm deep holes.
2.
Align the wall plate(B) to the holes, secure it in place
by screwing in lag bolts(L) with a lag bolt washer(J)
on each bolt.
Mounting the TV to the Wall Bracket
1.
Take the Television with the mounted wall plate and
slide it down onto the wall plate until in place.
2.
Secure them together by taking two of the M4x12
bolts and screw them into place(C).
*This will be subject to change dependent on each individual order,
Videotree cannot guarantee all screens will have the mounting bracket
pre-assembled. If not assembled the mount will be provided with
instructions with the order.