Videotree Asteria Outdoor, User Manual, Page: 11 / 17

019/04 020/04 Common
Shortcuts
Number Name Function
1 Power On / Off the Power Supply
2 Info Display the information of the Current Signal / Channel
3 Mute Mute the Sound
4 Sleep On / Off the Power Supply within a period of time
5 Numbers 0-9 Numeral Button
7 Red Only for Teletext
8 Green Only for Teletext
9 Yellow Only for Teletext
10 Blue Only for Teletext
11 VOL -/+ Left / Right or Volume -/+
12 CH -/+ Down / Up or Channel Down / Up
13 Menu Main Menu
14 TV/AV Switch the Input Source
15 Rec Record Digital Service
16 Exit Exit
17 OK Enter / DTV (Air) Channel Manager / ATV Channel Manager
18 Text Teletext Interface On / Off
26 EPG Electronic Program Guide
29 Pause/Play Pause / Play
30 FA Fast Forward
31 FB Fast Backward
32 Stop Stop
*See ‘Tuner User Guide’ for INDEX references and full tuner setup instructions.
!
Common
Shortcuts
Standby Function:
When your TV is ON press the “Power” button to enter standby mode.
When your TV is in Standby Mode, press the ‘’Power’’ button to start it.
Sleep Function:
When your TV is ON, start the “Sleep” function by pressing the “sleep” button. This function
will automatically turn the TV OFF after a certain period of time. Currently the supported time
periods are:
OFF / 10 mins. / 20 mins. / 30 mins. / 60 mins. / 90 mins. / 120 mins. /
180 mins. / 240 mins.
Switching the Input Source:
After the normal start-up process, press the “Source” button, then either “Up” or “Down” button
to choose the preferred source, then press either the “OK” or “ ” button to finish.
Info Function:
To find the current Source press the “Info” button to view the Source and additional information
such as:
Channel Number / Colour System / Sound System (in the TV source) / Current Frequency /
Bandwidth / Event Information / etc. (in the DTV (Air)Source).
Mute Function:
To mute the sound press the “Mute” button. To unmute the sound, press the “Mute” button once
more.
Set up Picture Mode: Select MENU then choose Picture
Pressing the “PMODE” button will change the parameters of the displayed picture such as:
Luminance / Contrast / Sharpness / Hue / Colour etc.
This function can also be found in the Main Menu.
Set up Sound Mode: Select MENU then choose Sound