Attention
►
Do not connect cables when power is on!
►
Please use DC 12V, currency no less than 1A.
Do not connect cables when power is on!
DC12V/1A
►
All uncovered cable should be less than 5mm, to avoid exceptional device damage.
►
Network cable quality will influence the communication distance. Please use repeater when exceeding
network communication distance.
Uncovered cable should be less than 5mm
Please use repeater when exceeding 80m
►
To install the cameras in outdoor places, please note that the protective covers shall be installed and
lightning protection measures shall be taken. In particular, don’t contact the cameras in case of lightning.
►
Camera working environment: Temperature -20
℃
～
+55
℃
,
humidity 10%
～
80%RH. When
use it outside, please prepare suitable protection cover.
Note:
Please pay attention to above notices, otherwise the device can not work normally and
even get damaged seriously.
TCP/IP
①
②
③
④
⑤
PC
Microphone
Audio input
Detective
Alarm input
Loudspeaker
Audio input
Alarm output
Warning lamp Remote device
R 485
S
①
Internal(or external) radio collectors like microphone to realize voice collection function
②
External alarm input devices like detector to realize setting up defense function on spot
③
External radio play devices like active loudspeaker to realize broadcast function
④
External alarm output devices like alarming lamp to realize remote alarm linkage function
⑤
Remote controlling camera through PTZ to realize one-in-all surveillance.
Based on TCP/IP network, it is convenient to manage and control terminal devices.
Notes:
①
Please refer to user manual for details concerning cable interface.
②
Camera lens and mounting bracket are not included in this products, and you need buy
them according to the real situation.
③
For other information not mentioned here, please read related user manual.
1. Put the self-supply lens on the installation seat of lens, and tighten the installation seat of lens onto the camera.
2.
Use 4 screws to fix the base on the top or bottom of the camera, according to different installation modes.
3.
Put the self-supply protective cover or bracket on the camera, and fix it to complete the installation.
Chapter 2: How to install IP camera
Chapter 1: Diagram for IP camera video surveillance
Standard Box IPC Installation Guide
Version: 1.0 Date: 2011.10
Installation
seat of lens
Base
www.VideoTrack.us
www.VideoTrack.us
