Page 7
MNVCDTRX301_0850
5 Installation
The unit must be installed exclusively by skilled technical personnel
.
Before carrying out the following operations, if not otherwise stated, always disconnect the unit
.
5.1 Unpacking
If the packaging does not present evident faults (due to falls or anomalous scratches), make sure that its contents
correspond to the list of items contained in paragraph
Contents of the packaging,
in section
Introduction.
The container is completely made of recyclable material. The installer will take care to dispose it according to
the recycling programs or, in any case, according to the rules in force in the country of destination.
5.2 Control of the operating data on the rating plate
Before installing the unit, control if the goods supplied correspond to the required specifications by
examining the rating plates, according to the section
Operating data on the rating plate.
Never make alterations
or connections not provided for in the present manual: the use of unsuitable devices can lead to serious risks
for the safety of the personnel and the security of the plant.
5.3 Dip-switches and configuration jumpers
In the following scheme identify Dip switches and configuration jumpers :
LD1
