Videotec DCMT8, Operating Instructions Manual

Page: 26 / 51

Pag. 10 DCMT89829
Keyboard and switching functions
1 2
4
6
8
3
5
7
10
12
14
16
9
11
13
15
9-16
1-8
ENTER
PRG AUX
Video switching keys
Digital keys 1-8 / 9-16
: allow the input direct entry on the manual channel of SW42REM/SW82REM sequential
switcher.
Key
Shift 1-8/9-16
: allow the change between 1-8 and 9-16 modes for the digital key group. If the key led is on, the
digital keys enter the inputs from 1 to 8; otherwise they enter the imputs from 9 to 16.
Example
:
•
Led of Shift key on: by pressing the key 5/13 the manual channel switches on input 5
•
Led of Shif key off: by pressing the key 5/13 the manual channel switches on input 13
Key
Enter
E
: allow the following actions:
•
set the manual channel back to automatic swicthing mode
•
reset (if the setup allows it) the alarm condition
P
key pressed for 5 second (till LED blinking) enter the switcher in program mode.
Telemetry control keys
The DCMT8 keyboard can control up to 16 DTMRXDTRX receivers. By operating on the telemetry keys, the
corresponding actions are carried out by the receiver identified by the same number of the input displayed on the
manual channel.
Example :
•
Led of Shift key on: if key 3/11 is pressed, the manual channel switches on input 3 and all telemetry
controls are performed only by the receiver n.3.
•
Led of Shift key off: if key 3/11 is pressed, the manual channel switches on input 11 and all telemetry
controls are performed only by the receiver n.11.
Zoom lens control keys
Keys
Focus near, Focus far
: activate the corresponding Focus actions
Keys
Zoom in, Zoom out
: activate the corresponding Zoom actions
Keys
Iris open, Iris close
: activate the corresponding Iris actions
Movement keys
Keys for
PAN & TILT
K
: allow the pan & tilt movement in the following positions: High, Low (TILT) and Left, Right
(PAN)
Key for
AUTOPAN
A
: make the pan & tilt move continuously between the limit swicthes, with direction left-right and
vice versa (AUTOPAN) key open/close a remote Auxiliary contact number 1 on telemetry receivers
Auxiliary keys
X
key open/close a remote Auxiliary contact number 1 on telemetry receivers
Video switching keys
Telemetry control
keys