Videoswitch
Vi-P1016
Quick Guide
34
PTZ Control
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Configuring PTZ settings
Before you start:
For connection to the analog camera/dome, please check that the PTZ and the device are connected properly
through RS-485 interface.
Steps:
1.
Enter the PTZ Settings
interface.
Menu>Camera>PTZ>General
2.
Choose the camera for PTZ setting in the
Camera
dropdown list.
3.
Enter the parameters of the PTZ camera.
Note:
All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocol can
be set for network cameras.
Example:
If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud rate field.
4.
Click
Copy
if you want to configure same settings to other PTZ cameras.
5.
Click
Apply
button to save the settings.
