User Manual of Network Camera
37
Notes
:
The valid value range of MTU is 500 ~ 1500.
The Multicast sends a stream to the multicast group address and allows multiple
clients to acquire the stream at the same time by requesting a copy from the
multicast group address. Before utilizing this function, you have to enable the
Multicast function of your router.
3.
Click
Save
to save the above settings
.
Note
:
A reboot is required for the settings to take effect.
6.3.2
Configuring Port Settings
Purpose:
You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface:
Configuration > Basic Configuration >
Network > Port
Or
Configuration > Advanced Configuration >
Network > Port
Figure 6-7
Port Settings
2.
Set the
HTTP port, RTSP port and HTTPS port of the camera.
HTTP Port
: The default port number is 80, and can be changed to any port range
1024 to 65535.
RTSP Port:
The default port number is 554.
HTTPS Port:
The default port number is 443, and can be changed to any port
range 1024 to 65535.
