User Manual of Network Camera
29
5.3
Recording and Capturing Pictures Manually
In the live view interface, click
on the toolbar to capture the live pictures or
click
to record the live view. The saving paths of the captured pictures and clips
can be set on the
Configuration > Local Configuration
page. To configure remote
scheduled recording, please refer to
Section 7.2
.
Note
:
The captured image will be saved as JPEG file or BMP file in your computer.
5.4
Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the PTZ
parameters on RS-485 settings page referring to
Section 10.8
RS-485 Settings
.
5.4.1
PTZ Control Panel
On the live view page, click
to show the PTZ control panel or click
to
hide it.
Click the direction buttons to control the pan/tilt movements.
Figure 5-3
PTZ Control Panel
Click the zoom/iris/focus buttons to realize lens control.
Notes
:
There are 8 direction arrows ( , ,
,
,
,
,
,
) in the live view window
