Videoswitch V400-G400-16e, User Manual

Page: 33 / 57

Digital Recorder
28
9.3.6 Time Date Alignment Alignment
The position of the time and date may be set here using the arrow keys. Press the
BACK
key to exit.
9.4 Alarms
9.4.1 Activity Detection
Activity detection zones may be set for each camera.
Use the
UP
,
DOWN, LEFT
and
RIGHT
keys to move the screen cursor around and the
OK
key to toggle between setting zones and clearing zones.
Where zones are set, activity will be detected.
Use the number keys to enter the sensitivity and number of pixels that have to be active to
trigger an alarm. For example enter 62 to set the sensitivity to 6 and the pixel count to 2.
The higher sensitivity setting, the more sensitive the activity detection is.
The higher the pixel count, the less sensitive the activity detection will be to false triggering.
The pixel count specifies the number of zones that have to be simultaneously active in order
to trigger an activity alarm (i.e. the higher the pixel count, the lower the chance of triggering)
Use the
DEF
to toggle all zones one or off.
9.4.2 Critical Alerts
9.4.2.1 Cameras
Set the cameras here that you wish to monitor for video loss (i.e. camera failure). The
simplest method is to press the
DEF
key. This will automatically check all the currently
connected cameras.
9.4.3 Clear Event List
The event list is cleared using this option. Press
OK
to clear all events.
9.4.4 Alarm Timers
9.4.4.1 Weekday
Specify the times when alarm inputs are to be enabled for Monday, Tuesday, Wednesday,
Thursday and Friday using the
LEFT
,
RIGHT
,
UP
and
DOWN
keys.