EN-16
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
To change a menu setting using the Projector Control Panel:
1.Press the MENU button.
Press MENU once again to hide the menu (acts as the ESC button on the Remote
Controller).
2.To select option menu, press the SELECT button (acts as the menu controller
button on the Remote Controller).
3.To change the specific setting, press the + or – button (Keystone button).
4.Press the ENTER button to confirm the menu selection.
Note:
SPECIAL KEY BUTTON – Keystone, Mute, Volume
If the Menu status is ON, use the – or + button for adjustment.
If the Menu status is OFF, use the Special key button itself for adjustment.
Menu Options
The following menus are described in this section in detail:
Input
Image
Computer
Audio
Misc
Option
Reset
Input Menu
This menu allows to specify the
signal source that you wish to
project. This is particularly useful
if you have several sources (video
and/or computer) connected to your
projector.
