EN-14
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
Focusing and Positioning the Screen Image
After an image appears on the screen, check to see if it is in focus and whether it fits
properly on the screen.
To adjust the focus of the image, rotate the focus ring, which is the outer ring on
the projector’s lens.
To adjust the size of the image, rotate the inner zoom ring. Zooming out to make
the image larger or zooming in make it smaller on the screen.
Operational Indicator
There are two LEDs on the top of the projector, the Power LED and the Lamp LED.
They provide valuable information about the projector.
LED TYPE
COLOR
STATUS
MEANING
Power LED
Green
Solid
The projector is powered and ready.
Power LED
Red
Flashing
The projector system has some
problems with its fan, so the projector cannot
start up.
Lamp LED
Green
Solid
The lamp is in good condition and is
projecting at maximum brightness.
Lamp LED
Green
Flashing
The lamp is close to its end of life, but
the lamp is still operational.
Lamp LED
Red
Solid
The lamp has reached its end of life and
must be changed soon. The lamp will
continue to operate until it fails. Change
the lamp and reset the lamp time counter.
If the lamp is off, then the ballast will
become malfunction.
Lamp LED
Yellow
Flashing
The projector is shutting down. The fan
motor is cooling the lamp for shutdown.
Do not unplug the power cable or turn
the power switch off before the Lamp
LED turns off. The fan motor will turn off
when the lamp has cooled.
Lamp LED
Red
Flashing
Temperature is too high. The lamp will
turn off.
