5.6. Swing
Function
By using the swing function, you can make the camera move between 2 Preset positions
repeatedly.
When the swing function runs, the camera moves from the preset assigned as the 1st point
to the preset assigned as the 2nd point in a CW (Clockwise) direction. Then the camera
moves from the preset assigned as the 2nd point to the preset assigned as the 1st point in
a CCW (Counterclockwise) direction.
In case the preset assigned as the 1st point is the same as the preset assigned as the 2nd
point, the camera turns on its axis by 360° in a CW (Clockwise) direction and then it turns
on its axis by 360° in a CCW (Counterclockwise) direction. Speed can be set from 1°/sec to
up to 180°/sec.
Set Swing To set Swing, use the OSD menu.
Run Swing
Method 1) <Run Pattern> [Swing NO.+10]
ex) Run Swing 3: <Run Pattern> [13]
Method 2) <Go Preset> [Swing NO.+140]
ex) Run Swing 3: <Go Preset> [143]
Deleting Swing
To delete Swing, use the OSD menu.
Doc # INS-20/21Z704T-PZ30
Issue Date: 07/28/2008
Revision: A
Page 20 of 49
