Recording of the remote control
The alarm panel must be put in "Recording device mode", and
the keypad must display“
PRESS PROGRAM BUTTON OF
DEVICE
”.
Press
5 seconds
simultaneously on the ON and OFF keys of
the remote control.
When released the remote control emits bips and then
records.
If the remote control does not record, first verify if the keypad
displays well :
then simultaneously press once more on the ON and OFF of
the remote control for 5 seconds (
by firmly pressing on the
keys
). If the remote control does not record then carry out the
operation once again but this time for 12 seconds.
PRESS PROGRAM
BUTTON OF DEVICE
Press
simultaneously for 5 seconds
ON and OFF
> Fonctioning
During the arming (Full and Special modes) and disarmings, it is
necessary to press on the desired key and release very quickly
with the first beep. Do not press and hold on the key !
On the other hand, if the desired control is accepted by the panel,
the remote control will emit 2 beeps otherwise one and you will
have to retry ...
For alerts (long pressing for 2 seconds on the partials), from the
begining of the pressing the remote control emits a beep, then
again at the end 2 seconds indicating that the duration of pressure
is sufficient, you can then release the key. If the panel recieved
the frame of alert, the remote control emits 2 beeps, indicating a
good functioning condition. Otherwise the remote control will only
emit one sound, then renew the operation.
> Remark : This remote control has only one battery (lithium)
solded with an autonomy and a standard use of 10 years.
Do not
try to open the remote control.
Reminder of the controls
Full Arming
Special Mode 1
Audible
Panic Alert
by pressing 2
seconds
Disarming
Special Mode 2
Silent panic
alert
by
pressing 2
seconds
According to the version of the Videofied panel, if we use the remote control to arm the system, it transfers the time out beeps (which will
enable you to know if the contact of the site remained open : 4 seconds long beep on the remote control, if everything is ok, the remote control
transfers the beeps normally). It is not necessary to wait for the end of the beep to leave the site (for example, if arming is carried out from a
car, the beeps will automatically stop at the end of 45 seconds).
EMEA SALES
23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
Hot line : +33 (0)820 846 620 / UK : 0871 951
Fax : +33 (0)3 90 20 66 36
© 2009 RSI Video Technologies Videofied® is a Registered Trademark of RSI Video Technologies.
Specifications subject to change without notice.
North American Headquarter
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Hot line : 877-206-5800
Fax : 651-762-4693
www.videofied.com
I N S T A L L A T I O N D A T A S H E E T
4 buttons remote control
RC
Made by RSI VIDEO TECHNOLOGIES
RC means RC600 for
USA/Canada, RC700 for
Australia/Singapore and
RC200 for Europe and
rest of the world.
