Mounting
>
Use proper tools and hardware.
>
Mount indoors in a temperature-controlled environment.
>
Mount camera 2.1 to 2.3 m (6.9 to 7.5 ft.) from the floor.
>
Mount detector on an outside wall, aimed at area to protect.
>
Do not aim detector at windows, especially those that
let in direct sunlight, or at heat sources such as lamps,
fireplaces, radiators, and heating vents.
>
Do not aim detector at moving objects such as curtains,
fans or animals.
1
Separate base from camera.
2
Hold camera base against
mounting surface and mark the
two appropriate mounting holes.
3
Drill pilot holes and install
anchors where needed.
4
Place base on mounting surface
so holes line up with
pilot holes/anchors and secure
base with appropriate screws.
5
Install batteries into camera, observing correct polarity.
6
Attach camera to base and secure with screw.
WARNING : Do not cover the Fresnel lens !
Flat Wall Mounting Holes
Corner Mounting Holes
Indoor MotionViewer DCV601
I N S T A L L A T I O N D A T A S H E E T
www.videofied.com
