Charge the battery
To charge the device battery:
1.
Take the USB cable from the device packaging, and attach it to power adapter. Now connect the power adapter into a
standard AC wall outlet.
2.
Connect the micro USB connector on the cable into its designated port at the bottom of the device. The battery level
indicator on the device screen will start scrolling horizontally to indicate that the battery is being charged.
Note:
Exercise extreme caution while connecting the charger to the device. The connectors on the charger and on the phone may get
damaged if too much force is applied while connecting them.
3.
If the battery is completely discharged, it may take a while before the on-screen charging indicator starts scrolling.
4.
When the battery is fully charged, the battery level indicator on the device screen will stop scrolling.
5.
Once the charging is complete, disconnect the charger from the device and then from the wall outlet.
Battery Use:
To extend the battery life of your device:
•
Use the standard wall charger to charge the battery for the first time.
•
During the first 3-4 charge cycles, charge the battery until the battery indicator on the display stops scrolling.
•
Avoid partial charging. Also, wait for the battery to discharge completely before charging it again.
•
Charge the battery using the USB cable only if the recommended wall charger isn’t readily available.
•
Avoid keeping the device on vibrate mode.
Know your device
Phone Layout
Summary of Contents for V1524
Page 1: ...User s Manual V1524...
