Item
How to Disassemble and Assemble
Drawings
BASKET-
SPINNING
OUTER TUB COVER is fitted to BODY B with snap locks.
To remove OUTER TUB COVER, hold it tightly from
center and PULL upwards.
Snap locks will disengage from the BODY B.
Untighten a nut assembled to the BRAKE WHEEL, and turn
a bolt to counterclockwise and removeit.(Fig. 2)
(Used tool boxdriver)
Lift the SPIN BASKET to upward and remove it,
from BRAKE WHEEL. (Fig 3 )
CAUTION: Beware not to loose the W ATER-CUTTER
because it will slide out from SHAFT-Bwhen
BASKET-SPINNING is removed.
Besure to followings after replacing the SPIN BASKET.
Screw properly theboltwhich holds BRAKE WHEEL to
SPIN BASKET,otherwise, too high fastening may cause
breaking the bolt.
After screw the bolt, youmust tighten the nut
for secure fixing.
Unplug the power cord for the
work unnecessary to power on like
disassembling. Do not hold the
plug by a wet hand
Failing to unplug may cause an
electric shock.
UNPLUG POWER
WARNING
(Fig. 3)
SPIN LID
(Fig 1)
SPIN TUB
NUT
BOLT
(Fig 2)
SPIN
MOTOR
BRAKE WHEEL
PULL
SPIN
TUB
6. SERVICE INFORMATION
INSERT
15
6-2. DISASSEMBLY INFORMATION
1.
OUTER TUB COVER
(Fig. 1)
2.
3.
