5.8GHz DeskTop Video Series Manual Rev. C 2007
5
SYSTEM SETUP
Channel Selection
WARNING
–
DO NOT OPERATE TRANSMITTER WITHOUT ANTENNA
CONNECTED TO ANTENNA PORT
. Failure to do so will result in damage to the unit and
will void the warranty
.
Since the transmitter and receiver look similar, these instructions apply for both devices when
changing channels. For the wireless link to work, both devices must have the same channel
selected.
1.
Attach the included rubber duck antennas to the transmitter and receiver.
2.
Power-UP the Transmitter/Receiver using the included power supply & switch to “ON”
3.
Set the desired channel by turning the rotary switch to channels from 1 - 8
4.
Repeat these steps for the receiver. The receiver must have the same and matching
channel to receive the video signal
5.
We strongly recommend that you
do not adjust the video gain
adjustment without first
consulting a member of the VideoComm Technologies Tech Support Team
Channel # 1
5.733 GHz
Channel # 6
5.828 GHz
Channel # 2
5.752 GHz
Channel # 7
5.847 GHz
Channel # 3
5.771 GHz
Channel # 8
5.866 GHz
Channel # 4
5.790 GHz
Channel # 9
5.866 GHz
Channel # 5
5.809 GHz
Channel # 0
5.733 GHz
