MXR-5842-47 Series Manual Rev. B 2007
5
SYSTEM SETUP
Camera Power Supply Options
WARNING
–
DO NOT OPERATE WIRELESS CAMERA WITHOUT ANTENNA CONNECTED TO
ANTENNA PORT
. Failure to do so will result in damage to the unit and
will void the warranty
.
1.
Ensure the mini antenna is attached to the transmitter.
2.
Power-UP wireless camera either with the included power supply or with a battery and power jumper
input cables. See examples below.
3.
Connect the 1.3mm barrel jack into the bottom of camera. RED LED light will confirm power.
4.
NOTE: The wireless camera does not have an ON-OFF switch and therefore the moment you connect
a power source to the wireless camera, it is operational. Important if using a battery supply.
5.
See specifications for operating voltage range. Higher than 13VDC can permanently damage the
wireless camera. Lower than 8VDC of operating voltage, the camera may not work.
6.
Adjust camera focus as required
7.
Do Not bend the black part of the antenna
Wireless operation from Battery power source
is dependant on type and quality of batteries.
Call Tech Support for suggestions.
Only use a VideoComm Technologies power supply.
Model # PS-9300mx.
