Day-Night Camera Series Manual Rev.D 2013
11
All Models: Power Connection
Only use the power supply included with this camera to
ensure proper voltage and amperage.
There are THREE power indicator LEDS located next to the
Frequency Channel Selection Rotary Switch.
Take note of the power indicator LEDS to ensure proper Voltage
Red
LED means the Voltage is too low – Check your cable length and
wiring
Green
&
Red
means you have the Correct Voltage
Green
means the Voltage is too high. Ensure the use of included power
supply Model # PS-121A
INSTALLATION
Antenna & Power Connection
Universal Mounting Bracket Overview
VideoComm Technologies
Customer Service
Bus (905) 336-9665
US Toll Free 888-379-2666
Fax (905) 336-9662
E-mail-
Web Site-
www.VideoTransmitters.com
Monday - Friday 8:30am- 5:00pm
Eastern Standard Time
Wireless Models Only: Antenna Connection
Carefully thread the antenna onto the connector on the back side of
the camera. Do Not use a wrench or a tool –
Hand Tighten ONLY
.
For best transmitting pattern – Ensure the antenna is pointing “UP”
All camera models
have the ability to mount in almost any scenario – including wall &
desktop mounting. We suggest using proper counter-sink plugs when mounting the bracket
to any surface and ensure proper support. For best results, use the included Mounting
Bracket Template to mark the location for your counter-sink plugs & screws. Once the
universal 3-Axis bracket is mounted, almost any camera angle can be achieved.
Model Shown # ZX-580SR120
