video xtreme VX-22d, Owner'S Operating Manual

Page: 77 / 84

Serial Communications
Runco VX-22d Owner’s Operating Manual 65
PRE
L
IMINAR
Y
Image Pre s et Command s
SISF 0
Loads “ISF Night” image preset
ISF Night
SISF 1
Loads “ISF Day” image preset
ISF Day
SISF 2
Loads “Custom 1” image preset
Custom 1
SISF 3
Loads “Custom 2” image preset
Custom 2
Menu Navigation Command s
The following serial commands are meant to emulate buttons on the remote control or DHD
Controller front panel. Each button has its own serial command, so effectively it is as if you were
using the IR remote only you’ll be doing so via serial commands. These commands provide active
OSD responses just like the IR remote.
ENTR
ENTER (or S ELECT ) button
(none)
EXIT
EXIT button
MENU MENU button
MND
Down-Arrow ( ) button
MNL Left-Arrow ( ) button
MNR
Right-Arrow ( ) button
MNU Up-Arrow ( ) button
Picture Adju s t Command s
The following serial commands are meant to emulate the discrete picture adjustment buttons on
the remote control unit. Use them in conjunction with
MNL and/or MNR to make picture
adjustments. For example, to increase Brightness by five increments, send this sequence of
commands:
MBR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
EXIT <Enter>
MBR Adjust Brightness
(none)
MCOL
Adjust Color Level
MCON Adjust Contrast
MTIN
Adjust Tint
Table 6-1. S erial Command s (continued)
Command De s cription Re s pon s e