Disarming MemoCam
®
To deactivate (disarm) MemoCam:
1. Point the remote control unit at the
MemoCam unit and enter the disarm code
using the buttons labeled 1-4 on the remote
control unit (refer to Figure 7 on page 11).
2. Press
Disarm (refer to Figure 7 on page 11).
The MemoCam unit beeps three times and
the Arm mode LED turns off.
The default disarm code is: 1234. To define a
new disarm code, refer to the MemoCam
Software Manual
.
LED Indicators
As shown in Figure 2 on page 6, MemoCam
has the following LED indicators:
Table 1. MemoCam LEDs
LED Color
Description
Multimedia
Card Status
(left)
Red
Error or Multimedia
Card is faulty or not
inserted correctly
Blinking
Green
Data is being
written to the
Multimedia Card
Orange
Multimedia Card is
full
PIR Activation
(middle)
Flashing
Red
Movement
detected
Arm mode
(right)
Orange
MemoCam unit is
in Arm mode
None
MemoCam unit is
in Disarm mode
LED indicators except the power LED indicator
can be enabled or disabled. Refer to the
MemoCam Software Manual
.
¡
13
