Figure 4. Mounting Bracket
2. Place the wall-mount section of the bracket
on the desired location on the wall, and
mark the drill points through the two
fastener holes.
3. Drill the holes (if necessary) and attach the
bracket to the wall with screws.
4. Retighten the two mounting bracket pieces
so that the MemoCam mount section can
still be rotated with slight pressure.
5. Clip the upper part of the MemoCam unit’s
holder to the bracket and rotate, as
indicated in Figure 5, until the MemoCam
snaps into place.
Figure 5. Mounting the MemoCam Unit
6. Adjust the position of the MemoCam unit
by moving it slowly up/down and left/right
to the desired position.
7. Remove the MemoCam unit carefully from
the bracket without changing the bracket
position.
8
¡
