iBT100 12 Volt Automotive Battery Analyzer User’s Guide - English Version_V2.00
4
2.
Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-)
terminal.
3.
Rock the clamps back and forth to make sure the clamps are firmly connected.
4.
When the tester is correctly connected, it boots up automatically and show following main
menu.
NOTE
Do not connect the tester to a voltage source greater than 30VDC; otherwise you may damage
the tester.
NOTE
If you are testing inside a vehicle, make sure all accessory loads are cut off, the key is not in the
ON position and the doors are closed.
2.2 Battery Test
Select the battery test, choose battery type and press OK key to continue:
(1) Choose testing standard: the standard which you can see the front of the battery ,such as
CCA, CA, MCA, JIS, DIN, IEC, EN, SAE, BCI and GB.
