99
!
Address
– IP address or URL domain name for the (DVR) device. It should be
the same as the IP address (for Static IP) or URL (for PPPoE) in Network Setup
for the (DVR) device.
!
Control Port
– the control port for the (DVR) device. The default value is 67.
!
Data Port
– the data port for the (DVR) device. The default value is 68.
!
Video Stream
– “Record” – live video same as recording stream, or “Extra” –
extra network stream (set as in
Sec. 6.10.4 Advanced Network Setup
) if dual
streaming is supported for the (DVR) device. The default value is “Record”.
!
User Name
– the login user name for the (DVR) device. It must be in the list
in Password Setup for the (DVR) device. Please note that
different levels of
users have different available operations.
!
Password
– the corresponding password for the login user name for the (DVR)
device.
!
Auto Connection
– whether the user wants to connect automatically to this
(DVR) device.
!
Connected
– whether this PC is connected with the (DVR) device now.
If a
DVR is connected, the user may select it, and click on “Reboot” to reboot it.
The other properties in the dialog are similar to those described in
Chapter 6
. Please
refer to
Chapter 6
for the detailed descriptions. Besides, the user can
download/upload
the configurations from/to the connected DVR, or
open
/
save
the
configurations from/to the designated directory.
Click on this icon to call up remote Software Upgrade dialog.
The current software
version of the DVR(s) will be shown in the “status” field.
Please select the DVR
device and upgrade file in the PC, and then click on Start button to start the software
upgrade process. The Upgrade status will be updated according to the progress.
When the upgrade file is uploading, the user may click on Stop/Close button to stop
the upgrade process.
Note : There must be one formatted HDD in the DVR for the remote upgrade to
succeed. After the software in the DVR is upgraded, the DVR will restart
immediately and the PC will be disconnected from the DVR. Please do step 7
in Before Logging On, and then re-run the I.E. to connect to the DVR again.
