4
3
SYSTEM SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<
DATE/TIME SETUP
>
<
RELAY TYPE
>
<
PASSWORD
>
<
SET HOME POSITION
>
<
SET NORTH DIRECTION
>
LANGUAGE
BACK
EXIT
SYSTEM SETUP
1
>
- Home position means the origin of pan angle calculation. The
value of pan angle displayed on the screen is based on this
home position.
- By using joystick, move the camera to the desired position and
press near key.
- Home is not effective to tilt angle.
- If you change the location of the home position, all horizontal
location of functions such as preset, VST, pattern, group and
privacy zone will be shifted based on the changed home
position.
Set Home Position?
When you replace the camera block or the orientation of camera is
changed due to maintenance operations, it is very difficult to maintain the
same pan orientation. Therefore, all function data depending on pan
orientation such as preset, VST, pattern, group and privacy zone are not
useful any more accordingly. However, even in this case, you can reuse the
data if you redefine set home position on the previous home position.
For setup, refer ‘EDIT SCENE’ on page 26.
The direction will be displayed on the right-bottom of the screen,
pan is ‘0’ and direction is ‘N’.
SET HOME POSITION
5
SET NORTH DIRECTION
6
1
2
ENGLISH
5
6
DATE/TIME SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DATE
TIME
BACK
EXIT
01/JAN/2008(TUE)
00:00:01(H/M/S)
RELAY TYPE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
RELAY1
BACK
EXIT
NORMAL OPEN
EDIT PASSWORD
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
OK
CANCEL
- - - - - - - - - -
1
2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
a b c d
e f g h i j k l m n
o p q r s t u v w x
y z < > - /
:
.
DISABLE
SET HOME POSOTION
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
0/0/x1/E
SET NORTH DIRECTION
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
0/0/x1/N
[NEAR:SELECT/FAR:CANCEL]
0/0/x1/N
DATE/TIME SETUP
2
<DATE/TIME SETUP>
Moves to ‘DATE/TIME SETUP’ screen. Refer screen 2 below.
<RELAY TYPE>
Moves to ‘RELAY TYPE’ setup screen. Refer screen 3 below.
<PASSWORD>
Moves to ‘PASSWORD’ setup screen. Refer screen 4 below.
<SET HOME POSITION>
Moves to ‘SET HOME POSITION’ screen. Refer screen 5 on page 37.
<SET NORTH DIRECTION>
Moves to ‘SET NORTH DIRECTION’ screen. Refer screen 6 on page 37.
- Contacts type of relay out are defined.
- Refer page 14 for the detailed information.
LANGUAGE
Select a preferred language among English, Spanish, French, German,
Italian, Russian and Portuguese.
DATE
Date is displayed in dd/mm/yy format.
1. If you press the near key, the focus will be placed on ‘dd’.
2. Sets date moving joystick Up/Down.
3. Moves joystick Left/Right to move to date-month-year.
4. The values in the field are changed using Up/Down keys.
The day is automatically calculated when you set the day.
ENGLISH / ESPAÑOL / FRANÇAIS / DEUTSCH
/ ITALIANO / РУССКИЙ / PORTUGUÊS
TIME
Time is displayed in HH:MM:SS format.
Sets time same as setting date.
01 / JAN / 2000 ~ 31 / DEC / 2037
RELAY TYPE SETUP
3
RELAY1
- Sets the 4 characters long password. If this function is set to
‘ENABLE’, the password is required whenever you enter OSD
menu. The master password is ‘4321’.
To input password, refer ‘LABEL’ on page 27.
EDIT PASSWORD
4
NORMAL OPEN(N.O) / NORMAL CLOSE(N.C)
Press
Near/Enter
Key
OSD - SYSTEM SETUP
37
OSD - SYSTEM SETUP
3
36
