Attach the
Brackets (2)
to the rear of the TV using four of the
Bolts (D-K)
with the proper size
Washers (N-O)
as shown in Fig. 1a. Make sure to use the same bracket holes for each side to insure
the
Brackets (2)
are centered top-to-bottom. Tighten using the
Allen Wrench (4)
. Do not over tighten.
Do not force the bolts into the mounting holes on your TV. Do not use an electric drill to
tighten these bolts on your TV. This could damage the equipment or cause personal injury.
CAUTION: Do not place the TV face down on a hard surface when installing the mounting plate
on the TV. Placing the TV face down on a hard surface can result in equipment damage. Use a
blanket or other suitable surface.
If your TV has a flat straight rear, and your screen size is 55” or less, spacers are most likely not
necessary.
The
Brackets (2)
must be installed on the TV with the hook on each bracket facing down.
N-O
5
D-K
D-K
N-O
2
2
N-O
D-K
Step 2: Attach the left and right brackets to your TV
