14
Select to turn on or off the power indicator.
Enable/ Disenable Mobile Monitoring;
Select whether to enable the voice broadcast during Internet
access, and the voice broadcast, intercom volume adjustment,
broadcast volume and microphone volume when the video is
turned on/ off;
Select the broadcast language and time zone of the camera;
Select setting default encryption (built-in encryption mode) and
user-defined encryption (set encryption password);
Setting the time of recording.
Restart the camera and reset the wired or wireless network mode (in
the same manner as 3.2).
View the camera model, connected WIFI, system version, IP
address, MAC address and WIFI signal strength.
You may check the total capacity of video and pictures, remaining
capacity and status, or format the memory card.
Check if it is necessary to update your firmware (if it is unnecessary
to update the firmware, it will indicate that you have updated to the
latest version and this function cannot be activated).
Restart the camera.
Refresh setting information.
Delete the camera.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
EN
