1. Safety instructions
General
Please read the documentation supplied with this product first, so that you are familiar with the safety signs and directions before
using the product. This product is designed and tested in accordance with international standards. The equipment should be used
for the designated application only.
•
WARNING - These servicing instructions are for use by qualified personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that specified in the operating
instructions unless you are qualified to do so.
•
WARNING - ELECTRIC SHOCK HAZARD
- The product is used in conjunction with a permanent
energy source (battery). Input and/or output terminals may still be dangerously energized, even when the
equipment is switched off. Always disconnect the battery before carrying out maintenance or servicing the
product.
• The product has no internal user-serviceable components. Do not remove the front plate or operate the
product if any panels have been removed. All servicing must be undertaken by qualified personnel.
• Please read the installation instructions in the installation manual before installing the equipment.
• This is a Safety Class I product (supplied with a protective grounding terminal). The chassis must be
grounded. A grounding point is located on the outside of the product. Whenever it is likely that the
grounding protection has been damaged, the product must be turned off and secured against unintended
operation; please contact qualified service staff.
• Ensure that the equipment is used under the correct ambient conditions.
Never operate the product in a wet or dusty environment.
Never use the product where there is a risk of gas or dust explosions.
• Ensure that there is adequate free space (10 cm) for ventilation around the product and check that the
ventilation vents are not blocked.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use of an attachment not recommended or sold by the marine unit manufacturer may result in a risk of fire,
electric shock, or injury to persons.
Transport and storage
Ensure that the mains power and battery leads have been disconnected before storing or transporting the product.
No liability can be accepted for any transport damage if the equipment is shipped in non-original packaging.
Store the product in a dry environment; the storage temperature must be between -20°C and 60°C.
Consult the battery manufacturer's manual in respect of transport, storage, charging, recharging and disposal of the battery.
Phoenix Inverter Smart Manual
Page 1
Safety instructions
