Victron energy Phoenix 12/300, User Manual, Page: 20 / 34

20 manual
4. OPERATION
4.1 LED
INDICATIONS
The switch and LED’s are located on the front of the Phoenix inverter (see
Illustration 4).
LED’s :
On = indication when unit is 'ON'.
Economy = indication when unit is in
‘economy’ mode.
Overload = indication for overload
condition.
low batt. = indication for low battery condition.
Temp. = indication for high temperature
condition.
4.2 O
N
/
OFF
/
ECONOMY SWITCH
With the ‘on/off/economy’ switch the inverter
switches on, off or in economy mode, (see
Illustration 5). When switching to ‘ON’, the
following startup procedure takes place
1. The LED ‘low batt’ will illuminate
for one second;
2. The LED ‘on’ will illuminate.
When switching to ‘economy’ the led ‘economy’ will flash.
If the load is high enough the inverter will switch on and
the led ‘economy’ and the led ‘on’ will illuminate.
(see section 4.7).
4.3 O
VERLOAD INDICATION
When the inverter is overloaded, the 'overload' LED will flash. If the
overload is too high the inverter will switch off automatically, in this case
the LED ‘overload’ will illuminate continuously. The Phoenix inverter will
automatically switch on again after 25 seconds.
Illustration 4.
Illustration 5.