manualshive.com logo in svg

Victron energy CCGX, Instructions Manual

Share
Download
Victron energy CCGX Instructions Manual Download Page 11

2018-08-21 11:59

11/27

Color Control GX manual

Victron Energy - https://www.victronenergy.com/live/

Startech USB300WN2X2D
Zyxel NWD2105

Although other Wi-Fi dongles may work, they have not been tested and we do not offer support for
other dongles.

The Wi-Fi menu shows the available networks. When a network is selected, it is possible to fill in the
password (if the password is not already known) to connect to the network. Setting up via WPS (Wi-Fi
Protected Setup) is not supported.

When the CCGX finds multiple Wi-Fi networks of which the password is known, the strongest network
is selected automatically. When the signal of the connected network becomes too weak, it will
automatically switch to a stronger network - if it knows the password of that network.

1.6.3 Mobile (cellular) network using a 3G or 4G router

To connect the CCGX to a mobile (cellular) network, such as a 3G or 4G network, use a cellular router.
Connect the CCGX to that router with either a LAN cable or the router's Wi-Fi network.

Make sure you use a router that is designed for unattended setups. Do not use low cost consumer-
grade routers intended for business or leisure travel. A more expensive professional router will quickly
pay for itself, and you won't have wasted journeys simply to perform a re-set. Examples of such
professional routers are the 

H685 4G LTE from Proroute

, as well as the 

Industrial 4G router range from

Pepwave

.

More information in 

this blogpost

.

Note that the CCGX does not support USB 3G/4G dongles.

1.6.4 USB tethering using a mobile phone

This is a useful facility when it works - but don't rely on it because it has not proved very dependable.
Consult the internet for instructions about tethering for your phone and its particular operating
system. We have heard of it working on:

Samsung Galaxy S4

…but not on:

iPhone 5s with iOS 8.1.1

1.6.5 IP Configuration

Almost no installations will need the IP address configuration to be inserted manually as most systems
support automatic IP configuration (DHCP) - and that is also the CCGX default setting. If you do need
to configure the address manually, select the following template:

Summary of Contents for CCGX




























Reviews:

No comments

Brands by name

Popular brands

Load more brands