MAINTENANCE/PROPER HANDLING
Handling Vinyl Records
• Do not touch the record’s grooves. Only handle records by the edges or the
label with clean hands. Touching the record surface will cause your record’s
quality to deteriorate.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges.
• Avoid placing records in direct sunlight, close to a heat source
(radiators, stoves, etc.), or in a location subject to vibration, excessive dust,
heat, cold or moisture.
How to Replace the Turntable Stylus
(Replacement Needle# ITNP-S1)
The stylus should last about 50 hours under normal use. However, it is recommenced that the stylus
be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus
may damage the record. The highest speed of 78 RPM records would wear
out the stylus more quickly.
Removing the Stylus from the Cartridge
1. Set a screwdriver at the tip of the stylus and push
down to the direction “
A
”.
WARNING
: When applying force to stylus, too much
may damage or break the stylus.
2. Pull the stylus out toward the direction “
B
”.
Installing the Stylus
1. Hold the tip of the stylus and insert the other edge
by pressing toward direction “
C
”.
2. Push the stylus up toward direction “
D
” until it locks at the tip.
Caution:
• Do not remove or bend the stylus needle.
• Don not touch the needle to avoid injury to your hand.
• Turn off the unit’s power before you replace the stylus.
• Keep out of reach of children.
8
