13
RECORDING
Before Recording
Audio from the PHONO, TAPE, CD, AUX, or BLUETOOTH sources can be recorded on
the USB memory. Note: All sources record to USB, the format is MP3.
Record from BT/AUX/PHONE/TAPE
1) First Insert a USB memory stick into the USB port.
2) Pick the source of music and rotate the selector knob (BT/AUX/PHONO/TAPE)
a) If using a record, put the vinyl on the turntable.
b) Place the needle on the record. The unit will play automatically.
3) Start playing your music from your preferred source.
4) Press RECORD button to enter recording mode. “REC” and “USB” will appear on the display.
Note: It needs a few seconds to read the USB memory stick, the LED display will appear USB
flashing LOAD BUSY.
5) After that it will start to recording automatically and the audio track will show on the display.
6) Tracks can be assigned manually by pressing the RECORD button during recording. Then
“00:00” will flash on the display a few seconds, and the next audio track will show on the display.
7) To stop recording, press the STOP ( ) and REC and USB will disappear from the display.
Note: Recording volume is preset and cannot be adjusted. The listening volume does not affect the
recording process.
Recording from CD to USB:
1) First Connect the USB memory stick into USB port.
2) Select CD Source mode, then put a CD on the tray and close the tray.
3)
The unit will enter the CD mode, the CD can be recorded while CD is stopped OR while playing.
4) To record from the beginning of the CD:
a) Press the RECORD button to enter the recording mode and it will start recording from
the first track.
b) When recording is finished, it will exit the record mode automatically.
5)
To record from a specific track:
a) Select the exact track you want to record using the
BACK and NEXT buttons
(
or
).
b) Then press RECORD to start recording from that specific track.
c) Press STOP to end the track recording.