User Manual for VSP
Victory
Rev. 10/20
Victory Refrigeration
19
CONDENSER CLEANING
Keeping the condenser coil clean is critical to efficient
operation.
1. Unplug unit from power supply.
Rotating fan blade can cause
personal injury.
Unplug unit from power supply
before beginning to clean
condenser
CAUTION
2. Remove the Phillips head screws at the top of the
panel.
3. Once the screws have been removed the you can
lower the panel.
Please note the electrical cord will still be connected
to the panel.
4. Examine condenser surface, if dusty, brush and
vacuum the dust and lint from the surface of the
coil. Brush up and down to avoid damaging the fins.
Use care to not disturb the wires connected to the
controller.
Note: If the coil is greasy, the coil will need to be
cleaned with coil cleaner and that should be left to an
experienced technician.
To reinstall the rear panel line up the bottom of the panel
to the bottom of the unit keeping the screw holes lined up
on the panel and on the unit.
5. Reinstall the Phillips head screw.
Note: Air filters are not recommended as they restrict
the flow of cooling air.