2
1. Please read the Assembly Instructions prior to assembling this product.
2. To avoid damage, assemble the product on a non-abrasive surface such as carpet.
3. Make sure all screws, nuts, and bolts are tightly fastened before the product is used.
4. Not for Commercial Use
5. Keep all 4 legs of the chairs on the ground when using them. Do not rock or tip back in
the chairs.
6. Care: Use a soft, clean cloth that will not scratch the surface when dusting. Never use
water to clean your furniture as it may cause damage to the finish. Using solvents of
any kind on your furniture may damage the finish. Always use coasters for beverage
glasses and protective pads under hot dishes and plates. Liquid spills should be
removed immediately, use a soft clean cloth; blot gently and avoid rubbing. Avoid
prolonged exposure to moisture and sunlight.
7. Estimated assembly time is fifty minutes when 2 people are assembling.
G E N E R A L I N F O R M AT I O N , T I P S , & T R I C K S
Please make sure you have all parts before beginning assembly. Please wait until all steps are
completed before tightening bolts and nuts. We recommend using two people for assembly.
1. Use the long end of the Allen wrench to fasten Allen bolts loosely and quickly.
2. Use the short end of the Allen wrench for final tightening.
A Phillips head screwdriver is necessary for assembly. It’s not included in
hardware list.
