Victory Innovations VP90, User Manual

Page: 8 / 12

VP90 • User Manual • 8
victoryinnovations.com
(800) 741-7788
HOW TO USE
PREPARING THE BACKPACK AND CART FOR USE
1. Using the 8’/2.4m hose provided, place the hose in the channel located on the
base of the cart, allowing around 6 inches (15 cm) of hose on the right side of the
cart. This is where the hose will connect to the backpack.
2. Place the backpack onto the cart. Tuck the waist straps behind and into the
space located behind the backpack, between the extension arms.
3. To secure the backpack onto the cart, loop the thin black strap located on top of
the shoulder straps through each black plastic clip located on each side of the
extensions.
4. Connect the hose to the backpack, starting with the electrical connection and
then the solution.
5. Insert the battery, making sure the door is closed and secure before adding any
solution to the tank.
6. Fill with chemical needed for the spraying job. It is recommended to remove the
tank from the backpack to prevent any spillage onto the backpack, cart or floor.
7. Attach the spray handle to the hose, starting with electrical connection and
ending with solution.
8. Install the nozzle and extension wand (if using) using the nozzle wrench.
1. Push or pull the backpack to the
location you intend to spray.
2. Turn the backpack on.
3. Press the trigger on the spray handle,
making sure to contact the grounding
strip on the trigger to reduce any
electrostatic discharge.
USING THE VP90 CART
Place accessories as shown in the back
handle for storage.