NOTE: This operation should be consistently done at the same
time every day (for example, every morning or every evening).
SETTING THE TIME:
1. Pull out the crown into position 2.
2. Turn the crown to set the hour and the minute.
3. Push the crown back to position 1.
If your watch is
equipped with a date function,
please refer to the
following instructions:
9
MECHANICAL WRISTWATCH WITH HAND-WOUND
MOVEMENT
NOTE:
Your watch will have either a «pull-out» or
«screw-down» crown. To determine this, gently try to
pull out the crown to position 2. If it does so, your
watch has a pull-out crown.
If not, use the thumb and forefinger to apply mild
pressure on the crown while rotating toward you to
release it. If it does so, your watch has a screw-down
crown. Turn crown towards you to release.
After use, push the crown back to position 1, then
press and screw down the crown (to ensure a tight
seal).
MANUAL WINDING:
Leaving the crown in position 1, wind the watch by
turning the crown away from you until fully wound.
Do not over wind.
8
