![Victor Tools H672 Instructions For Use Manual Download Page 2](http://html1.mh-extra.com/html/victor-tools/h672/h672_instructions-for-use-manual_1013860002.webp)
Deluxe
Metal Detector
H672
Instructions for Use
Please read and retain these instructions for future reference
v001: 26/03/21
contact a museum or historical society in your area.
⚫
Leave the land and vegetation as it was. Fill in any holes you dig.
⚫
Use your detector only in safe areas.
⚫
Dispose of any junk you find, only in approved areas. Do not leave it for the next treasure hunter to find.
⚫
Do not carry out metal detection on protected sites such as; those defined as Scheduled Monuments,
Sites of Special Scientific Interest or military crash sites, and those involving human remain), and also
those other sites on which metal-detecting might also be restricted (such as land under Countryside
Stewardship or other agriculture/environment schemes).
⚫
You must report any potential treasure to your local Finds Liaison Officer https://finds.org.uk/contacts
or the British Museum ([email protected]).
PREPARATION
Follow these steps to adjust the metal detector’s stem.
1.
Turn the stem’s lock nut clockwise until it loosens.
2.
Lengthen or shorten the stem so when you stand upright with the detector in your hand, the search
coil is level with and about 1/2 to 2 inches above the ground with your arm relaxed at your side.
3.
Turn the stem’s lock nut
anti- clockwise to lock it in place.
ADJUSTING THE SEARCH COIL
Loosen the knobs at the search coil’s end, then adjust the search coil to the desired angle. (The search coil
should be parallel with the ground.) Tighten the knobs just enough to keep the search coil from rotating or
wobbling.