Victaulic VE26 Series, Operating And Maintenance Instruction Manual

Page: 32 / 44

TOOL RATING AND ROLL SELECTION
VE26S FOR STEEL AND SCHEDULE 40 STAINLESS STEEL PIPE
VE26P FOR ALUMINUM AND PVC PIPE
Pipe Size Dimensions - inches/millimeters
Nominal
Size
inches
Actual
Outside
Diameter
inches/
mm
VE26S VE26P
Steel Pipe
Wall Thickness
(Schedules 5,
10, and 40)
Stainless Steel
Pipe Wall Thickness
(Schedule 40)
Aluminum Pipe
Wall Thickness
(Schedules 5,
10, and 40)
PVC Pipe
Wall Thickness
(Schedule 40)
Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum
2
2.375 0.065 0.154 0.154 0.154
0.065 0.154 0.154 0.154
60.3 1.7 3.9 3.9 3.9
1.7 3.9 3.9 3.9
21/2
2.875 0.083 0.203 0.203 0.203
0.083 0.203 0.203 0.203
73.0 2.1 5.2 5.2 5.2
2.1 5.2 5.2 5.2
3
3.500 0.083 0.216 0.216 0.216
0.083 0.216 0.216 0.216
88.9 2.1 5.5 5.5 5.5
2.1 5.5 5.5 5.5
4
4.500 0.083 0.120 – –
0.083 0.120 0.237 0.237
114.3 2.1 3.0 – –
2.1 3.0 6.0 6.0
5
5.563 0.109 0.134 – –
0.109 0.134 0.258 0.258
141.3 2.8 3.4 – –
2.8 3.4 6.6 6.6
6
6.625 0.109 0.134 – –
0.109 0.134 – –
168.3 2.8 3.4 – –
2.8 3.4 – –
This tool rating table is applicable only to ANSI piping and is based upon the following
material grades. Refer to the appropriate international standard for other systems.
Steel – Brinell Hardness Number (BHN) of 180 BHN and less.
Stainless Steel – Types 304/304L and Types 316/316L
Aluminum – ASTM B-210, Grades 6061-T4 and 6063-T4
PVC Type I, Grade I (PVC 1120)
PVC Type I, Grade II (PVC 1220)
PVC Type II, Grade I (PVC 2116)
* All minimum and maximum wall thicknesses are nominal
TM-VE26_32 REV_C
TM-VE26 / Operating and Maintenance Instructions Manual