manualshive.com logo in svg

Victaulic VAPS224, Operating And Maintenance Instruction Manual

Share
Download
Victaulic VAPS224 Operating And Maintenance Instruction Manual Download Page 7

 

VAPS 224 Pipe Stand

5

 

TOOL NOMENCLATURE

 

NOTICE

 

• Drawings and/or pictures in this manual may be exaggerated for clarity.

• The pipe stand, along with this operating and maintenance instructions manual, contains trademarks, copyrights, 

and/or patented features that are the exclusive property of Victaulic Company.

Base

Ball Transfer

Support

Upper Column

Intermediate Column

Ball Transfer

Top Plate

Grease Fitting

Hand Knob

Vertical
Adjustment
Handle

➀

➀

Failure to follow instructions and warnings can result in 
serious injury, property damage, or faulty installation.

• Before installing, operating, or servicing this tool, read and 
  understand the Operating Instructions and all warning 
  labels on this tool.

• Always wear safety glasses and foot protection.

If you have any questions about the safe operation of this tool,
contact Victaulic Tool Company, P.O. Box 31, Easton, PA 18044-0031, 
610-559-3300.

0567 Rev.A

R031272LAB       3/99

 

TM-VAPS224 0149 Rev_B.fm  Page 5  Tuesday, May 31, 2005  8:20 AM

Summary of Contents for VAPS224















Reviews:

No comments

Brands by name

Popular brands

Load more brands