11
ASSEMBLY
PROCEDURES
Vac Assembly
Remove blower tube as needed before assembling into vac configuration. The following
instructions are to assemble for vacuum mode use.
Ensure that the engine is in the OFF position before assembly.
The engine will not start with fan cover open.
Do not pull the engine cord with fan cover open.
2. Ensure the vac exhuast
tube is lined correctly
into place.
3. Turn anti-clockwise to
secure vac exhuast
tube. Never use the vac
without the bag attached.
4. Fasten screw to lock
vac exhuast tube into
place.
5. Turn impeller cover
knob anticlockwise
to unlock impeller cover.
8. Turn clockwise. The vac
nozzle does not require a
screw fastener.
1. Turn stop switch off
and ensure engine is
stopped - slide the vac
exhuast tube into place.
7. Align the bayonet fitting of
the lower vac intake tube
with the upper vac intake
tube outlet and slide into
place.
9. Slide the upper
vac intake tube
into place.
Vac assembly continued
on next page.
6. Pull the impeller cover
back.
LR02390A-A.indd 12
22/07/2014 4:37:20 PM
Not for
Reproduction
