9
If the engine does not start up even after several attempts, read the
section on Troubleshooting
Always pull the starter out in a straight line.
IF THIS IS NOT FOLLOWED, STARTER CORD WILL BE FRAYED
AND CORD WILL BREAK!
This is not covered by the Product Warranty.
Starting the engine when warm
If the machine has not been switched off for more than 15-20 minutes
•
Set the machine on a hard, level surface.
• SWITCH THE ON/OFF SWITCH TO ‘ON’ (
I
).
•
Hold the machine firmly and pull out the starter until you feel it start to resist. Ensuring
that the direction is straight out of the eyelet
(not chaffing on the edge)
, tug sharply on
the starter. The machine should start after 1-2 tugs. If the machine still fails to start after
6 pulls, repeat steps 1-6 for starting the engine when cold.
Switching of the Engine
Emergency Stop procedure
•
If it becomes necessary to stop the machine immediately. Let go of the throttle lever and
move the stop switch to 'OFF'.
Practical tips
•
Practice all operating techniques with the engine switched off before you start to use the
machine.
2 stroke
Not
for
Reproduction
