!33%-",9
PROCEDURES
5
Grasscatcher - hard/solid type
Assembling the grasscatcher
1
Assemble the adjustable covers 1A or directional covers 1B to the top half of the
grasscatcher.
,OCATETHECENTREPROTRUSIONOFTHEMESHINTOTHECENTREHOLEONTHEINSIDEOFTHE
grasscatcher top, ensuring the curved edge of the mesh faces the rear handle. Firmly
push the mesh into the top half of the grasscatcher, making sure that the four snap
hooks engage securely.
,OOSELYLOCATETHEREARHANDLEAREASOFTHETOPANDBOTTOMGRASSCATCHERHALVESTHEN
loosely locate the side edges. Check that all eight hooks from the top half are loosely
located in the slots on the bottom half then firmly push the two halves together over
each snap hook. Check that all of the snap hooks have engaged securely.
4 Tighten the two screws fitted to the front of the grasscatcher.
1A (adjustable) type
1B (directional) type
Not
for
Reproduction
