9
!33%-",9
PROCEDURES
$ISCONNECTSPARKPLUGLEADFIRST
1. Fit one of the bolts through the handle hole
from the inside and into the square hole in
mounting bracket of the base. place washer
then spring washer and secure with nut but do
not fully tighten at this stage.
2. Repeat the same step for the remaining three
securing bolts.
3. Tighten all four nuts securely.
Attaching the lower handles
Attaching upper handle
Attaching the throttle control
Upper
handle
Lower
handle
Upper
handle
Lower
handle
Upper
handle
s !TTACHTHEUPPERHANDLESUSINGTHEKNOBSTOGGLESAND
bolts provided. The knobs/toggles should be on the
outside.
s !TTACHTHETHROTTLECONTROLTOTHEINSIDEOFTHE
upper handle, so that the lever lifts upward
toward the user.
s 3ECURETHETHROTTLECABLETOTHE
lower handle with the cable clamp
supplied.
Model
All 16in Steel Models
Not
for
Reproduction
