background image

13.    Dress properly when operating the mower.  Do not wear loose clothing and  jewellery such 

as bracelets or necklaces which may get caught in the handle etc.   Always wear solid shoes 
with non-skid rubber soles.  Never operate the mower  when barefoot or when wearing 
sandals. 

14.    Always wear SAFETY GLASSES to avoid eye damage from foreign objects such  as twigs, 

small rocks etc.  which may be struck by the rotating blade. (Regular  eyeglasses are not 
safety glasses.)  Wear work gloves to protect your hands. 

15.    Protect your lungs by wearing a dust mask if the mowing conditions are dusty. 

16.    If you are sensitive to the noise, wear hearing protection during long periods  

17.    Never operate the mower while under the influence of drugs, alcohol or  medication. 

18.    Periodically inspect the exposed cords on the charging unit, and on or near the  handle, for 

any damage.  If damage occurs, do not use the mower.  Have the  damaged cords replaced 
by an Authorised Service Centre 

19.    Do not use the mower if it does not start normally, or does not stop normally when  the 

OPERATOR PRESENCE CONTROL LEVER is released.  Have the unit inspected by an 
Authorised Service Centre. 

20.    Always inspect the area to be mowed ahead of time.  Clear the area of items such  as 

stones, sticks, twigs, pine cones and other large foreign objects which may be  struck 
or thrown by the blade and which may cause personal injury.  Foreign  objects may also 
damage the mower. 

21.    Keep the mower clean and dry.  Use a damp cloth when cleaning.  Never use  water, 

gasoline, solvents or other petroleum-based or solvent based products for  cleaning. 

22.    Never use the mower in a gaseous or explosive environment.  Normal sparking of  a running 

motor may ignite fumes. 

23.    Promptly remove the SAFETY KEY.  After each use of the mower, before servicing  or 

changing the blades, the SAFETY KEY should be removed. 

24.    Never play with the starter SWITCH BUTTON or the OPERATOR PRESENCE  CONTROL 

LEVER when the mower is not in use. 

25.    When replacing blades, use only original EnvirOmower blades.  Use of other blades may  

result in serious damage to the mower and/or personal injury.  Be sure to always  install 
blades with the correct orientation.  Original EnvirOmower blades are  permanently stamped 
(in English) “THIS SIDE UP”  

26.    Remove adjusting wrenches after each blade change, and make a habit of  checking under 

the deck that no wrench is present (and for other possible hazards)  before each use.

27.    Check the mower regularly for damaged parts, misalignment of moving parts mounting and 

other obvious problems which may affect proper operation.  Have  damaged or defective 
parts repaired or replaced by an Authorised Service Centre 

28.    Maintain the mower with care.  For best performance keep blade clean and sharp.  Follow 

operating, maintenance and storage instructions in this manual.  Use the  mower only for 
the use for which it is intended. 

29.   Never make height adjustments while the mower motor is running. 

3!&%49

HANDLING

BATTERY MUST BE RECHARGED AFTER EACH USE!

 A battery will last longer if charged as soon as it is used. 

DO NOT DISCHARGE COMPLETELY AS THIS WILL DAMAGE THE BATTERY!

5

5183 LR00830A Enviromower V3 A2_9.indd   5

5183 LR00830A Enviromower V3 A2_9.indd   5

25/2/09   12:05:14 PM

25/2/09   12:05:14 PM

Summary of Contents for Enviromower ENV369B





























Reviews: