background image

 Specifications

TRANSMISSION

Make

 

Tuff Torq® K46

Type

 

Foot Pedal Hydrostatic

Ground Speed

 

Forward: 0-5.6 MPH (0-9,0 km/h)

 

 

Reverse: 0-3.5 MPH (0-5,6km/h)

Drive

 Belt

Brakes

 Manual 

MOWER DECK

Cutting Width  

 

Model NXT 2346 

46" (116,8 cm)

Model NXT 2752 

52" (132,1 cm)

Base Deck Platform

 Side 

Discharge

Number of Blades/Type

 

3, Standard Lift

Frame Suspension

 Frame 

Hung

Deck Support Wheels/Number

  Standard, 4 Anti-Scalp Wheels

Height-of-Cut

 

1.5" to 4.0" (3,8 to 10,2 cm)

Mower Lift

 Electric 

Height-of-Cut

Cutting Positions

 Infinite

DIMENSIONS

Overall Length

 

71" (180 cm)

Overall Width (with deflector) 

Model NXT 2346  

59" (150 cm)

Model NXT 2752 

65" (165 cm)

Overall Height

 

45" (114 cm)

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive 
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained 
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower 
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient 
operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed 
and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated 
gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to 
a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, 
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. 
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this 
Series engine.

Replacement Parts

We recommend that you see an authorized Victa Dealer for all 
maintenance and service of the tractor/engine and parts. 

Accessories

For a list of the available accessories, see an authorized Victa 
Dealer.

 

Parts and Accessories

 

29

en

ENGINE

23 Gross HP Briggs & Stratton

Model

 Professional 

Series

TM

, V-Twin w/EFM

Horsepower

 

23 Gross HP @ 3600 rpm

Displacement

 

44.2 cu in. (724 cc)

Electrical System

 

Alternator: 9 amp Regulated, 

 

Battery: 12V-230 CCA

Oil Capacity

 

64 oz (1,9 L)

Engine Oil

 Synthetic 

5W30

Spark Plug Gap

 

0.030 in. (0,76 mm)

Spark Plug Torque

 

180 in-lbs (20 Nm)

Fuel Tank Capacity

 

Capacity: 4.0 gal (15,1 L)

27 Gross HP Briggs & Stratton

Model

 Professional 

Series

TM

, V-Twin w/EFM

Horsepower

 

27 Gross HP @ 3600 rpm

Displacement

 

44.2 cu in. (724 cc)

Electrical System

 

Alternator: 9 amp Regulated, 

 

Battery: 12V-230 CCA

Oil Capacity

 

64 oz (1,9 L)

Engine Oil

 Synthetic 

5W30

Spark Plug Gap

 

0.030 in. (0,76 mm)

Spark Plug Torque

 

180 in-lbs (20 Nm)

Fuel Tank Capacity

 

Capacity: 4.0 gal (15,1 L)

CHASSIS

Seat

 Mesh, 

Suspension

Seat Adjustment

 9-Position

Turning Radius

 

14 in. (35,6 cm)

Front Wheels

 

Tire Size: 15 x 6.0/

 

Inflation Pressure: 12-14 psi (0,82 -0,96 bar)

Rear Wheels 

Model NXT 2346 

Tire Size: 20 x 10.0-8

 

Inflation Pressure: 10 psi (0,68 bar)

Model NXT 2752 

Tire Size: 22 x 9.5-12

 

Inflation Pressure: 10 psi (0,68 bar)

Engine Power Rating Information

Not 

for  

Reproduction

Summary of Contents for 2690920

































Reviews: