Brake Pedal
Depressing the brake pedal applies the tractor
brake.
Ground Speed Pedals
The forward ground speed pedal controls the
tractor’s forward ground speed. The reverse
ground speed pedal controls the tractor’s reverse
ground speed.
Throttle Control
This controls the engine speed. Move the throttle
control FORWARD to increase engine speed and
BACK to decrease engine speed. Always operate
at FULL throttle.
Height-of-Cut Switch
This adjusts the mower cutting height. Press the
switch UP to raise the mowing cutting height
and DOWN to lower the mower cutting height.
The height-of-cut is displayed on the electronic
dashboard.
Starter Insert
When not in use, remove starter insert
and store out of the reach of children.
Remove the starter insert to shutdown
the engine.
Start/Stop Push Button
This starts/stops the engine and
activates the electronic dashboard.
• Press and hold the push button to
start the engine.
• Press the push button when the
engine is running to shut down the
engine. The electronic dashboard
will turn off after 3 minutes.
• Tap the push button when the
engine is not running to activate the
electronic dashboard.
STOP
STOP
Electronic Dashboard
See
Electronic Dashboard
section.
Power Take-Off (PTO) Switch
This engages and disengages attachments that
use the PTO. To engage the PTO, pull UP on the
switch. Push DOWN to disengage.
NOTE:
The operator must be seated firmly in the
tractor seat for the PTO to function.
Cruise Control
This locks the ground speed control in forward.
The cruise control has five lock positions.
Parking Brake
This locks the parking brake when the tractor is
stopped. See
Parking Brake
section.
Headlight Switch
This turns the tractor headlights on and off.
Transmission Release Lever
This releases the transmission so that the tractor
can be pushed by hand.
Fuel Tank
To remove the cap, turn counterclockwise.
Power Outlet (12V-DC)
The power outlet is 12V-DC. Accessories must be
rated at 9 amps or less.
12V
Tractor Controls
11
Reverse Mowing Option (RMO)
This allows the operator to mow (or use other
PTO driven attachments) while traveling in
reverse. To activate, turn the RMO key after the
PTO is engaged. The L.E.D. light will illuminate,
and the operator can then mow in reverse. Each
time the PTO is engaged, the RMO needs to be
reactivated if desired.
en
Not
for
Reproduction
