Vicpas IND110, Technical Manual

Page: 9 / 30

1-1
Chapter 1.0
Introduction
Electrically, the IND110 Signal Converter provides an accurate and economical way to
convert an analog strain gauge load cell(s) signal to a standard analog process
signal. It does this by conditioning the analog input, converting it to a digital signal,
normalizing and filtering it and then converting it back to an analog 4/20 mA signal. It
would then be typically sent to a remote analog input such as a PLC.
In addition to the 4/20 mA output signal, two discrete setpoint outputs are provided for
high and low level signaling.
Mechanically, the IND110 is self contained in a plastic housing for installation onto a
35 mm DIN rail or optionally installed in either a stainless steel IP66 enclosure or a
cast aluminum explosion proof enclosure when environmental protection is required.