Vicpas IND110, Technical Manual

Page: 20 / 30

IND110 Technical Manual
5-4
The views below illustrate module installation into the Nema 7/9 optional
explosion proof enclosure. It snaps onto the DIN rail in the same manner as above
but because of space limitations, snap the module onto the DIN rail first and then
install into the enclosure.
First, install the M6 screws loosely into predrilled holes in the enclosure. Next,
place module and rail onto screws. The rail slot is long enough to slide onto one
screw then center it between the two.
Position the rail as shown and tighten screw. Center the module and tighten other
screw to complete the installation.
Figure 10
Figure 11