UG:402
Page 2
IMPORTANT NOTICE:
Hazardous voltages may be present on the interfaced Vicor power module.
PERSONAL CONTACT WITH LINE VOLTAGE MAY RESULT IN SEVERE INJURY, DISABILITY, OR DEATH.
IMPROPER OR UNSAFE HANDLING OF THIS ACCESSORY AND RELATED POWER MODULE(S) MAY RESULT
IN SERIOUS INJURY OR DEATH
Read the precautions below entirely BEFORE using the PMBus
™
-USB Adapter. Do not operate the
PMBus to USB Adapter unless you have the appropriate safety precautions in place on your bench to
guarantee safety.
The list below is not comprehensive and is not a substitute for common sense and good practice.
n
n
During operation, the power devices and surrounding structures can be operated safely at high
temperatures.
n
n
Remove power from converter and use caution when connecting and disconnecting test probes and
interface lines to avoid inadvertent short circuits and contact with hot surfaces.
n
n
Never use a jumper in place of the fuse.
n
n
When testing electronic products always use approved safety glasses. Follow good laboratory practice
and procedures.
n
n
Avoid creating ground loops when making measurements of the isolated input or output voltage and
signals.
n
n
Care should be taken to protect the user from accidental contact when under power.
n
n
Care should be taken to avoid reversing polarities if connecting to the opposite (solder) side of the
board.
n
n
The PMBus to USB Adapter described in this document is designed for general laboratory evaluation,
and is not suitable for installation in end user equipment.
n
n
Refer to the specific Vicor power module data sheet of the interfaced product(s) for electrical,
thermal, and mechanical product details.
n
n
Signal cables 43503-01 and 43503-02 are rated up to five insertions and extractions. Insert and
extract the VIA signal connector cables by firmly grasping the connector body housing. To avoid
unnecessary stress on the connector, the cable should be appropriately strain relieved.
