• Keep the appliance away from children.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never remove the kettle from its base unit while in operation. Switch the appliance off first.
• Take care to close the lid properly before switching on, Otherwise, the appliance will not switch off automatically and hot water
may overflow.
• The kettle is intended for water heating only, and is not to be used for any other liquids.
BEFORE USE
• Remove all packing material from the kettle.
• Before connecting of the kettle check that voltage indicated on the rating label corresponds the mains voltage in your home.
• Place the filter.
• Fill the kettle with cool water up to the “MAX” mark and boil it. Empty the kettle. The appliance is ready for use.
INSTRUCTION FOR USE
FILTER PLACING
• Open the lid by pressing on the lid open button.
• Place the filter between the two grooves near the spout at the front of the kettle.
• Ensure that the filter is pressed down to the bottom of the grooves and fits correctly then close the lid.
NOTE: Never leave the filter loose in the kettle. Never remove the filter while the kettle contains hot water.
FILLING
• Remove the kettle from the base unit.
• You can fill the kettle with water via the spout or opening the lid.
• Do not fill with less than 0.5 liters of water (below to “MIN” mark) to prevent the heating element running dry while operating.
• Do not fill with more than 1.7 liters of water (up to “MAX” mark). Avoid overfilling to prevent the water spilling out during the boil-
ing process.
SWITCHING ON
• After filling your kettle with water, place the kettle on the base unit.
• Connect plug to power supply and press On/Off switch. The appliance will begin to operate and the inner indicator light will come on.
скачано с сайта Партнёр-Техника: partner-tehnika.ru
